Maximum flexibility in several areas of application
MIDA Solar can be used with any type of traditional AC pump, thereby offering maximum flexibility in several areas of application.
When using surface pumps, MIDA Solar can be used for an irrigation system drawing water from a nearby water supply, or powering a pool pump at no cost.
When using submersible pumps, MIDA Solar can fill tanks for watering livestock or simply irrigate lawns or crops.
MIDA Solar, in MP (MultiPower) version, guarantees the operation of the pump at any time of the day
To ensure the functioning of the pump at any hour of the day. This controls the peaks of water demand using AC input to avoid the oversizing of the photovoltaic system.
HMA accessory, MIDA Solar, in MP (MultiPower) version, can be powered in DC by solar panels or in AC by network or generator used in combination with MIDA Solar MP models, manages independently the exchange from a source of energy to another on the basis of several options that can be select by the user:
- irradiance level.
- hour of the day.
- achievement of the requested daily range.
- remote control trough digital command.
MIDA Solar Technical Specifications
|Model||V in DC||V in AC *||Max V out||Max I out||P2 motor power **||Size||Net weight||Packing dimensions||Total weight|
|MIDA Solar 203||90 – 400||90 – 265||250||3,5||1×230
|MIDA Solar 205||90 – 400||90 – 265||250||5||1×230
|MIDA Solar 207||90 – 400||90 – 265||250||7,5||1×230
* AC power available only for MIDA Solar MP models.
** Typical motor power. It is recommended to refer to rated motor current when selecting the MIDA Solar model.
|Rated frequency||50 – 60 Hz (+/- 2%)|
|Ambient temperature||-10 – 50°C (-14 – 122°F)|
|Max. altitude at rated current||1000 m|
|Settable digital outputs N.O. or N.C.||1. Motor run signal
2. Alarm signal
|Analog inputs (10 or 15 VDC)||1. 4 – 20 mA
2. 4 – 20 mA
3. 0 – 10 VDC
4. 0 – 10 VDC
|Digital inputs||4 digital inputs, configurable N.O. or N.C.|
|Communication||RS485 MODBUS RTU, Bluetooth® SMART* (4.0)|